Microsoft Dynamics AX 2012 Manufacturing, Production & Logistics - Slechts 6 dagen

Zeven redenen waarom jij voor jouw Dynamics AX 2012 cursus voor Firebrand kiest:

Bekijk deze video en zie waarom je met Firebrand geld en tijd bespaart

  1. Jij zal in slechts 6 dagen Dynamics AX 2012 getrained zijn. Doordat onze cursussen residentieel zijn kunnen wij langere lesdagen aanbieden en zal je tijdens je verblijf volledig gefocust zijn op jouw cursus
  2. Onze Dynamics AX 2012 cursus is all-inclusive. Cursusmaterialen, accommodatie en maaltijden zijn inbegrepen.
  3. Slaag de eerste keer voor Dynamics AX 2012 of train gratis opnieuw. Vraag naar de voorwaarden van onze certificeringsgarantie bij onze Education Consultants.
  4. Je zal meer over Dynamics AX 2012 leren. Waar opleidingen elders doorgaans van 9:00 tot 17:00 duren, kan je bij Firebrand Training rekenen op 12 uur training per dag!

  5. Je zal Dynamics AX 2012 sneller beheersen. Doordat onze cursussen residentieel zijn word je in korte tijd ondergedompeld in de theorie. Hierdoor zal je volledig gefocust zijn op de cursus en zal je sneller de theorie en praktijk beheersen.
  6. Je zal voor Dynamics AX 2012 studeren bij de beste training provider. Firebrand heeft het Q-For kwaliteitlabel, waarmee onze standaarden en professionaliteit op het gebied van training erkend worden. We hebben inmiddels 64.495 professionals getraind en gecertificeerd!
  7. Je gaat meer doen dan alleen de cursusstof van Dynamics AX 2012 bestuderen. We maken gebruik van laboratoria, case-studies en oefentests, om ervoor te zorgen dat jij jouw nieuwe kennis direct in jouw werkomgeving kan toepassen.

Denk jij klaar te zijn voor deze opleiding? Doe een GRATIS oefentest om je kennis te testen!

Wanneer wilt u deelnemen aan een versnelde opleiding?

Start datum

Eind datum

Status

Locatie

Nu boeken

22/5/2017 (Maandag)

27/5/2017 (Zaterdag)

Beëindigde cursus

-

 

25/9/2017 (Maandag)

30/9/2017 (Zaterdag)

Wachtlijst

Landelijk

 

6/11/2017 (Maandag)

11/11/2017 (Zaterdag)

Beperkte beschikbaarheid

Landelijk

 

18/12/2017 (Maandag)

23/12/2017 (Zaterdag)

Open

Landelijk

 

29/1/2018 (Maandag)

3/2/2018 (Zaterdag)

Open

Landelijk

 

12/3/2018 (Maandag)

17/3/2018 (Zaterdag)

Open

Landelijk

 

Wereldwijd heeft Firebrand in haar 10-jarig bestaan al 64.495 studenten opgeleid! We hebben ze allemaal gevraagd onze versnelde opleidingen te evalueren. De laatste keer dat we onze resultaten analyseerden, bleek 96.53% ons te beoordelen als ‘boven verwachting’

"Really good and intensive Course - learnt a lot in a short amount of time"
Jamie Robinson, Intelisense IT. - Microsoft Dynamics AX 2012 Manufacturing, Production & Logistics (6 Dagen) (7/3/2016 t/m 12/3/2016)

"The course was in a lot a detail. I learnt a lot in a short apace of time."
Jake Huebner, Intelisense IT. - Microsoft Dynamics AX 2012 Manufacturing, Production & Logistics (6 Dagen) (7/3/2016 t/m 12/3/2016)

"Comprehensive, complete and thorough training by people who know what they are doing."
Wendell Grosvenor, HSO. - Microsoft Dynamics AX 2012 Manufacturing, Production & Logistics (6 Dagen) (9/3/2015 t/m 14/3/2015)

"Intensive !"
T.J, Hardi International. - Microsoft Dynamics AX 2012 Manufacturing, Production & Logistics (6 Dagen) (9/3/2015 t/m 13/3/2015)

"Intense but excellent learning, from conceptual to details."
S.I.. - Microsoft Dynamics AX 2012 Manufacturing, Production & Logistics (6 Dagen) (9/3/2015 t/m 14/3/2015)

"Tired but very happy. It was rough but helped me achieve my goal for coming. 2 certificates!"
Ilkka Koivisto, eCraft. - Microsoft Dynamics AX 2012 Manufacturing, Production & Logistics (6 Dagen) (11/8/2014 t/m 16/8/2014)

"The training at Firebrand gave me an excellent introduction to Production in Microsoft Dynamics 2012. As a newcomer to the field i got a good insight to the functionality provided."
Johan Svernell . - Microsoft Dynamics AX 2012 Manufacturing, Production & Logistics (6 Dagen) (5/5/2014 t/m 10/5/2014)

"The trainer was very knowledgable."
Paschal Darcy , Erptech. - Microsoft Dynamics AX 2012 Manufacturing, Production & Logistics (6 Dagen) (5/5/2014 t/m 10/5/2014)

"You sleep, breathe and dream AX, and you pass the test!"
Angelica Fjellsen , Istone. - Microsoft Dynamics AX 2012 Manufacturing, Production & Logistics (6 Dagen) (5/5/2014 t/m 10/5/2014)

"Very concentrated and focused setup!"
Anoniem - Microsoft Dynamics AX 2012 Manufacturing, Production & Logistics (6 Dagen) (5/5/2014 t/m 10/5/2014)

"Very good training, service and accomodation"
Tomas Åström , Camfil. - Microsoft Dynamics AX 2012 Manufacturing, Production & Logistics (6 Dagen) (5/5/2014 t/m 10/5/2014)

"You guys are the best in terms of teaching, logistics, accommodation etc. etc"
Anoniem - Microsoft Dynamics AX 2012 Manufacturing, Production & Logistics (6 Dagen) (11/11/2013 t/m 16/11/2013)

"Hard work - good result"
Anoniem - Microsoft Dynamics AX 2012 Manufacturing, Production & Logistics (6 Dagen) (26/8/2013 t/m 31/8/2013)

"Trainer very good."
Paul Beazer , Rotork. - Microsoft Dynamics AX 2012 Manufacturing, Production & Logistics (6 Dagen) (27/5/2013 t/m 1/6/2013)

"Hard, great learning and rewarding"
Morten Vinther , Dolle A/S. - Microsoft Dynamics AX 2012 Manufacturing, Production & Logistics (6 Dagen) (27/5/2013 t/m 1/6/2013)

"Ive enjoyed the course and learned a lot more than I expected. "
Henrik Bejder. - Microsoft Dynamics AX 2012 Manufacturing, Production & Logistics (6 Dagen) (25/2/2013 t/m 2/3/2013)

"Hard work to do the course - but it pays! "
A.V.B.. - Microsoft Dynamics AX 2012 Manufacturing, Production & Logistics (6 Dagen) (25/2/2013 t/m 2/3/2013)

"If you are looking to significantly advance your knowledge and skills base in a very short space of time without interruption then this is the company to do it with."
Allistair McKenna , Rosti UK Ltd. - Microsoft Dynamics AX 2012 Manufacturing, Production & Logistics (6 Dagen) (12/11/2012 t/m 16/11/2012)

"Outstanding!"
Harri Alitalo , Nortal Oy. - Microsoft Dynamics AX 2012 Manufacturing, Production & Logistics (6 Dagen) (12/11/2012 t/m 16/11/2012)

"An intensive, long and interesting week. I have learned a lot, I will get use of in my daily work."
Sondre Kaupang, Advania. - Microsoft Dynamics AX 2012 Manufacturing, Production & Logistics (6 Dagen) (4/6/2012 t/m 8/6/2012)

"Very good"
Per Lundström , iStone Mercator AB. - Microsoft Dynamics AX 2012 Manufacturing, Production & Logistics (6 Dagen) (3/5/2012 t/m 7/5/2012)

"This is the third course I have done with Firebrand, and the first I have done in Europe. The instructor standards do not change, the Firebrand ethos remains the same and the package as a whole is very good, wherever you take a course."
Matthew Chamberlain, Chamberlain & Co. - Microsoft MCSE: Cloud Platform and Infrastructure (Azure) (9 Dagen) (10/7/2017 t/m 18/7/2017)

"Zeer veel informatie, maar wel deskundig en duidelijke uitleg!"
Henk Schinkel, geen. - Microsoft MCSA: Windows Server 2012 R2 (9 Dagen) (23/11/2015 t/m 1/12/2015)

"Fijne accomodatie en eten. Zeer ervaren en professionele docent"
Anoniem - Microsoft MCSA: Office 365 (5 Dagen) (26/11/2015 t/m 29/11/2015)

"Prima opleiding geweldige kundige docent uitstekende locatie"
Anoniem - Microsoft MCSA: Office 365 (5 Dagen) (26/11/2015 t/m 29/11/2015)

"You will learn a great deal with Firebrand and have every good chance in passing your chosen exams. Its a very unique experience. "
Anoniem - Microsoft MTA Networking, Security & Windows Server Administration (6 Dagen) (2/11/2015 t/m 7/11/2015)

"Fast Good learning!"
Anoniem - Microsoft MTA Networking, Security & Windows Server Administration (6 Dagen) (2/11/2015 t/m 7/11/2015)

"The instructor was very thorough and professional. He made the course very understandable. I was very impressed with his teaching methods and presentations. Firebrand is the best."
Anoniem - Microsoft MTA Networking, Security & Windows Server Administration (6 Dagen) (2/11/2015 t/m 7/11/2015)

"Great Instructor, much details and good stories from the IT Field. This is for me a drive to continue my IT career and learn more."
Anoniem - Microsoft MTA Networking, Security & Windows Server Administration (6 Dagen) (2/11/2015 t/m 7/11/2015)

"Very good way to pass certification if you're able to study and assimilate new knowledges quickly. "
Anoniem - Microsoft MTA Networking, Security & Windows Server Administration (6 Dagen) (2/11/2015 t/m 7/11/2015)

"Awesome! Great teacher with endless patience!! :)"
Anoniem - Microsoft Querying SQL Server (4 Dagen) (2/11/2015 t/m 5/11/2015)

"Efficient learning with the experience and qualified instructor. Highly recommended!"
Anoniem - Microsoft Querying SQL Server (4 Dagen) (2/11/2015 t/m 5/11/2015)

"Continue the way you are!"
Anoniem - Microsoft Querying SQL Server (4 Dagen) (2/11/2015 t/m 5/11/2015)

"Middelen om de trainingen te volgen zijn uitstekend."
Anoniem, HCG Hoedt - Microsoft Specialist: Implementing Microsoft Azure Infrastructure Solutions (3 Dagen) (16/10/2015 t/m 18/10/2015)

"Firebrand biedt een mooie geisoleerde omgeving, waarin je, gemotiveerd door een vakbekwame en gedreven docent, met medecursisten dag (en nacht) bezig kunt zijn met slechts een ding voor ogen: de cursusinhoud. Hoewel zeker vermoeiend, vind ik de cursussen van Firebrand absoluut de moeite waard in het traject van verkrijgen van vakgerichte kennis en certificering."
Anoniem, erwinbeelen.com - Microsoft Specialist: Implementing Microsoft Azure Infrastructure Solutions (3 Dagen) (16/10/2015 t/m 18/10/2015)

"Really enjoyable and very hard experience. Trainer made the course fun to do."
Anoniem - Microsoft MCSA: Windows Server 2012 R2 (9 Dagen) (19/9/2015 t/m 27/9/2015)

"Get more in less time"
Anoniem - Microsoft MCSD: SharePoint Applications (12 Dagen) (28/4/2014 t/m 9/5/2014)

"This course was realy good; you lose no time, an efficient way of work"
Philippe De Groote , saphico. - Microsoft MCSA: Windows Server 2012 R2 (9 Dagen) (27/10/2013 t/m 3/11/2013)

"8 Days course which also includes two weekends. Our trainer made it an experience I didn't want to miss!"
Sybrand Hartman, Tata Steel. - Microsoft MCSA: Windows Server 2012 R2 (9 Dagen) (27/10/2013 t/m 3/11/2013)

"Een zeer postitieve ervaring, alles is goed geregeld en de trainer was altijd bereid je vragen te beantwoorden. Je leeft hier echt voor de cursus dwz je staat er mee op en tijdens ontbijt begint het al en je stopt pas als je ogen dicht gaan bij het slapen. Zeer goede manier om kennis op te doen. Veel theorie maar ook wel Hands On!"
CG, Veiligheidsregio Kennemerland. - Microsoft MCSA: Windows Server 2012 R2 (9 Dagen) (9/6/2013 t/m 16/6/2013)

"Thuis studeren had me twee keer zoveel tijd gekost. Op de cursus kon ik me erg goed concentreren op de stof en zo ook mijn certificaten behalen in een zeer korte tijd."
Marc van Berkel, Linfosys. - Microsoft MCSA: Windows Server 2012 R2 (9 Dagen) (9/6/2013 t/m 16/6/2013)

"Prima docent, fijne locatie, maar erg intensief."
MV. - Microsoft MCSE: SharePoint 2013 (6 Dagen) (10/6/2013 t/m 15/6/2013)

"Its always great to be busy with SharePoint for a full week. All my goals are completed and got a very good understanding, learned a lot and cannot wait to start using this best practices in my daily work. Very good teacher with a lot of experience, from different kind of businesses."
Anoniem - Microsoft MCSE: SharePoint 2013 (6 Dagen) (10/6/2013 t/m 15/6/2013)

"Tsunami van informatie en leerstof komt over je heen. Voorbereiden op het assimileren, zeg maar opslorpen, van al deze kennis is een vereiste indien het lang geleden is dat je op de schoolbanken zat. Maar het is een reuze ervaring. Een belevenis en je honger wordt gestild."
Anoniem, VSOA Defensie - Microsoft MCSA: Windows Server 2012 R2 (9 Dagen) (7/4/2013 t/m 14/4/2013)

"- Tempo ligt erg hoog, de zaterdagavond (niet inbegrepen bij de 8 dagen) is dan ook zeer nodig. - Kom met genoeg kennis! - Kom met een goede motivatie!"
Rob de Haan, Van Dam ICT. - Microsoft MCSA: Windows Server 2012 R2 (9 Dagen) (7/4/2013 t/m 14/4/2013)

"Great teacher, learned a lot and had a good team! Really good way of learning."
Marloes Rutten, SplitVision. - Microsoft MCSA: Windows Server 2012 R2 (9 Dagen) (20/1/2013 t/m 27/1/2013)

"Het is niet gemakkelijk, je krijgt erg veel informatie tegelijk maar met de juiste instelling is het zeker te doen. De MCSA 2012 cursus is zeer de moeite waard en ik kan deze methode en de accomodatie zeker aanbevelen!"
Marc Willemsen, EIC BV. - Microsoft MCSA: Windows Server 2012 R2 (9 Dagen) (20/1/2013 t/m 27/1/2013)

"Goede en krachtige training!"
Chris Carremans, EASI / Appligen. - Microsoft MCSA: Windows Server 2012 R2 (9 Dagen) (4/11/2012 t/m 11/11/2012)

"Je moet met de juiste instelling naar de training komen. Je moet na de lesuren, nog willen studeren, en dat maakt het kei-hard, want "Alle beetjes helpen" Jezelf kalmeren doe je met deze zin: "2nd shot" Superbekwame instructor. Combineert hard studeren met hard lachen. Goede situatievoorbeelden helpen enorm."
Antonio Vanhove. - Microsoft MCSA: Windows Server 2012 R2 (9 Dagen) (4/11/2012 t/m 11/11/2012)

"Je heb wel vooraf een fundament van kennis nodig. Het is heel intensief, 13 uur per dag 13 dagen lang. De trainer was uitstekend."
Anoniem - Microsoft MCSA: Windows Server 2008 & MCITP Enterprise Administrator (13 Dagen) (9/9/2012 t/m 21/9/2012)

Want to be the first to gain Microsoft Dynamics AX 2012 training?

This course provides you with the skills required for Dynamics AX 2012 Manufacturing. You'll be provided with the tools and resources to perform basic tasks in the discrete manufacturing flow in Microsoft Dynamics AX 2012. You'll also learn the main features and processes used to run lean manufacturing.

You'll learn the following Training Materials:

  • Discrete Manufacturing Basics in Microsoft Dynamics AX 2012 Training Materials
  • Discrete Manufacturing Advanced in Microsoft Dynamics AX 2012 Training Materials
  • Lean Manufacturing in Microsoft Dynamics AX 2012 Training Materials
  • Process Manufacturing Production and Logistics in Microsoft Dynamics AX 2012 Training Materials

Lees meer ...

Belangstelling? Zie onze prijzen of bel ons op 024-8457770

Lees meer ...

Belangstelling? Zie onze prijzen of bel ons op 024-8457770

The course includes 4 x Training Materials. You will learn the following:

Discrete Manufacturing Basics in Microsoft Dynamics AX 2012 Training Materials

  • Describe the Production control module's main conceptual building blocks
  • Describe the interconnectivity between the Production control module and other modules in Microsoft Dynamics AX 2012
  • Define production orders and name the status changes as it passes through the production life cycle
  • Define the main elements that are setup and used when a legal entity legal entity works with a variety of production sites distributed over different geographic locations
  • Describe three companies in which production sites, conditions, and processes vary by multisite functionality
  • Provide a brief description of general improvements to the Production control module, including filtering and the Gantt Chart
  • Describe the main types of Bill of materials (BOM) and define BOM levels, components and lines
  • Define the creation of BOM versions and describe BOM version control methods
  • Describe the overall process of creating BOMs in Microsoft Dynamics AX 2012
  • Describe how to create BOMs not yet associated with an item
  • Describe how to create BOMs so that the BOM and the item can be set up or changed at the same time
  • Explain how to work with configurable BOMs, including the setup of configuration routes and configuration rules
  • Provide an overall explanation of the BOM calculation process
  • Describe how to create and use BOM scrap types and explain how a scrap calculation for a BOM is run
  • Describe the use of BOM measurements as a type of configuration and explain how this pertains to consumption and measurements that relate to BOM items
  • List and explain the ways of the standard BOM reports use
  • Define working time templates and describe how they are set up
  • Create working time calendars
  • Using Resource capabilities form.
  • Create resources and distinguish between resource types
  • Set up resource groups
  • Define how to set up and configure production operations and relations
  • Describe the use and setup of cost categories in production routes
  • Describe the use and setup of cost groups in production routes
  • Describe how to create route groups and attach them to operations in the route
  • Describe how to create and maintain routes and operations on the routes
  • Describe how scrap is managed in production routes
  • Configure the route network parameter and identify route networks in complex routing
  • Discuss the impact of production parameters at the legal entity and the site level
  • Describe the different ways production orders can be created
  • Describe how to create a production order manually
  • Explain the main activities that occur in the life cycle of a production order
  • Explain how the production order status is used in working with production orders
  • Describe the estimation process
  • Configure advanced settings including production groups and production pools
  • Distinguish between the various scheduling options
  • Explain the main characteristics of operations scheduling
  • Explain the main characteristics of job scheduling and describe how to use the Gantt chart
  • Discuss how to perform resource scheduling and describe the basic resource allocation principles.
  • Describe how master planning interacts with the Production module
  • Describe how to lock production orders
  • Describe how to dispatch scheduled jobs to a specific resource
  • Review how subcontracting is used for outsourcing
  • Adjust BOMs in connection with subcontractor work
  • Set up operations and routes to be performed by a vendor
  • Describe how to set up automatic updates
  • Describe the settings you must define to release a production order to the shop floor
  • Explain the main considerations and the settings used to start production orders
  • Explain the use of production journals in recording consumption
  • Describe the report as finished stage of the production life cycle
  • Describe the main element of the end production stage in the production
  • Name the types of standard inquiries that can be conducted in the Production control module on items in production
  • Describe the process of working with standards reports
  • Describe how base data reports can be used to analyze the productions process
  • List the three kinds of transaction reports and describe how they are used
  • Describe how Journal and Costing reports are used to view information on productions
  • Name the types of Balance reports and briefly describe how they can be used in deciphering production conditions
  • Describe how to use the analysis reports to view or print information on productions
  • Describe how route reports can be used to analyze the routes and operations in the different productions
  • Name the kinds of reports that can be generated on the resources in production and define how each is used
  • Describe how production papers are used in production
  • Explain how the update log reports can be used to identify information on the orders in each stage in the production process

Discrete Manufacturing Advanced in Microsoft Dynamics AX 2012 Training Materials

  • Review multisite functionality for the Production control module
  • List the Production control module's core conceptual elements
  • Review the Bill of material (BOM)
  • Review calendars and resources
  • Review operations and routes
  • Describe production life cycle, parameters, and production orders
  • Review definitions of operations and job scheduling
  • Review how master planning interacts with the Production control module
  • Describe product, storage and tracking dimensions
  • Explain how to set up and work with dimensions groups
  • Describe using serial or batch numbers to track and control manufactured items
  • Use inventory reservations in production
  • Describe inventory marking
  • Describe the inventory trace function
  • Describe how inventory dimensions are affected by multisite functionality
  • Describe working with the Bill of Materials (BOM) line type Vendor when using subcontractors
  • Describe how to generate purchase orders to a supplier when on-hand inventory is insufficient
  • Describe how to create a vendor production order
  • Create resources and groups for the vendor
  • Define production groups to establish a relationship between production orders and ledger accounts.
  • Describe how to use production pools to monitor production orders in specific categories.
  • Describe properties-set up on the working time template-which guide production orders to run under special times and conditions.
  • Attach a property to a resource.
  • Review the benefits of properties.
  • Describe how resource capabilities are set up and used to schedule production on alternative resources.
  • Create route groups and attach them to operations on a route.
  • Use the various scheduling methods.
  • Discuss the difference between operations and job scheduling.
  • Split a production order.
  • Set the Bill of Material (BOM) scrap percentages.
  • Set the scrap percentage on a Resource.
  • Set the scrap percentage for each operation in production routes.
  • Describe the costing of scrap.
  • Review steps in the production order life cycle
  • Describe production order ledger setting options
  • Define default ledger settings in production parameters
  • Describe production journals and how consumption is reported to the general ledger
  • Assign ledger settings for production groups
  • Analyze actual versus estimated costs for production orders and current production activities
  • Describe End and cost account production orders
  • Describe the interconnectivity of the production module with other modules in Microsoft Dynamics AX 2012
  • Describe the main elements of the production implementation checklist
  • Set up production parameters
  • Modify data types used by the productions series
  • Set up item groups and items
  • Set up BOMs
  • Describe the creation of working time templates, calendars, Resource groups, and Resources
  • Set up operations and routes

Lean Manufacturing in Microsoft Dynamics AX 2012 Training Materials

  • Describe the core concepts of Lean manufacturing.
  • Create a new production flow version and describe activity relations and constraints, picking activities and costing implications.
  • Define Kanbans and describe their types including: withdrawal, fixed quantity, event, scheduled and subcontracting Kanbans.
  • Explain how fixed quantity Kanbans are used including how to set up rules, review planning processes, and use the Kanban schedule board.
  • Describe how event Kanbans are used including how to configure rules, set up sales line events, Kanban line events, BOM line events and stock replenishment events.
  • Describe the processes associated with the planned order type Kanban.
  • Define and setup activity based subcontracting.
  • Describe production flow costing including: back flushing, conversion costs, cost reporting to the general ledger, and how production costing is set up for a Kanban job based on subcontracting activity.
  • Define how to set up and configure Kanban quantity calculation policies and how to create quantity calculations to generate and update Kanban rules.

Process Manufacturing Production and Logistics in Microsoft Dynamics AX 2012 Training Materials

  • Explain the process manufacturing features and create the setups at the released products level.
  • Explain a formula item and how it differs from a Bill of Material (BOM) item.
  • Create a product at the enterprise level.
  • Configure setups at the released product level.
  • Create and apply a product template.
  • Describe production types that are defined for any item, at the released product level.
  • Know the difference between a formula item and a planning item.
  • Define the formula lines and versions.
  • Explain the use of a formula and a route in multisite production scenario.
  • Explain the features and structural elements of the formula.
  • Define a formula level with an example of a formula at multiple levels.
  • Define a formula at multiple sites.
  • Define formula line types.
  • Describe the formula features in formula lines.
  • Describe different access methods to create and maintain a formula.
  • Define different version control methods available in formula management.
  • Describe how to copy a formula from other formula versions.
  • Modify a formula version by changing the yield percentage or formula size.
  • Define the steps to edit a formula using the formula designer.
  • Create a formula version using scalable and percentage controlled options in the formula lines.
  • Describe how to use a plan group to substitute items in formula lines.
  • Setup step consumption and its use in batch order processing and in a formula calculation.
  • Describe batch order costing.
  • Explain the prerequisites for formula calculation.
  • Explain the steps to create and activate item prices.
  • Calculate a cost price and sales price using a formula calculation.
  • Describe the enhancements in a formula calculation relating to the process manufacturing.
  • Estimate a cost price and sales price in a batch order and sales order.
  • Explain the stages of the batch order life cycle.
  • Explain how a batch order can be processed using the Manufacturing Execution System (MES).
  • Define the setup and report an unplanned co-product and by-product in a batch order.
  • Explain a rework batch order and the steps to process a rework batch order.
  • Define the process manufacturing functionalities adhering to master planning.
  • Explain multisite planning and its prerequisites.
  • Perform Master Planning across the sites within a legal entity.
  • Describe intercompany planning and create the required setups.
  • Define downstream source plans in master plans.
  • Describe key transactions that trigger multi company planning.
  • Describe methods to create intercompany sales orders.
  • Define co-products and their prerequisites for planning.
  • Plan co-products using a planning item.
  • Plan co-products with a formula item.
  • Explain the purpose and benefits of containerized packaging.
  • Create bulk item conversion.
  • Create formula for the packed product with reference of bulk item.
  • Firm and consolidate the planned orders associated to a bulk item and packed product in the Planned order form.
  • Process the bulk and packed order and review the inventory.
  • Add and remove the bulk or packed order in the Consolidated batch orders form.
  • Define the setup for creating a Catch Weight (CW) item.
  • Create an inventory transaction with a partial visibility catch weight item.
  • Create an inventory transaction with a full visibility catch weight item.
  • Explain the use of catch weight in different transactions.
  • Define a batch disposition code and its related setups.
  • Define setup to integrate a batch disposition code with quality management.
  • Configure a batch disposition code associated to partial or full blocking of inventory.
  • Reset a disposition code for inventory batches manually.
  • Define shelf life and its related setups.
  • Configure the shelf life at the released product level.
  • Reserve inventory batches using the shelf life setup.
  • Explain the same batch reservation and its need for master planning.
  • Explain batch attributes and setups.
  • Create a batch attribute for an item.
  • Assign product specific and customer specific batch attributes.
  • Reserve batches by batch attributes.
  • Update inventory batch attribute manually.
  • Update inventory batch attribute automatically using quality order.
  • Explain the batch attribute groups.
  • Explain AVL and define its related setups.
  • Define item-vendor relationship and its period of validity.
  • Inquire and validate an approved vendor list in different forms.
  • Explain the necessity for a vendor batch update and its required setup.
  • Perform a purchase registration with a vendor batch update.
  • Define commodity pricing and its purpose.
  • Define the setups required for commodity pricing.
  • Setup the pricing calculation for commodity items.
  • Create price and margin data for a formula item.
  • View the commodity price calculation and update it in the trade agreement.
  • Define product compliance and configure its necessary setups in Inventory and warehouse management.
  • Associate product compliance setups for a specific item at the released products level.
  • Update the product safety data sheet for a specific item at the released product level.
  • Validate the product safety compliance data sheet during purchase and sales order processing.
  • Explain rebates and their setup.
  • Create item rebate groups and customer rebate groups.
  • Create a rebate agreements to a customer.
  • Process rebates to a customer.
  • Define the setup relating to advanced warehouse management for catch weight products.
  • Perform pallet transport for an inbound warehouse management process in catch weight unit.
  • Describe the setups for reservation in process manufacturing.
  • Perform sales shipment using advanced warehouse management function with FEFO date-controlled and same batch reservation

Lees meer ...

Belangstelling? Zie onze prijzen of bel ons op 024-8457770

Training Materials

  • Discrete Manufacturing Basics in Microsoft Dynamics AX 2012 Training Materials
  • Discrete Manufacturing Advanced in Microsoft Dynamics AX 2012 Training Materials
  • Lean Manufacturing in Microsoft Dynamics AX 2012 Training Materials
  • Process Manufacturing Production and Logistics in Microsoft Dynamics AX 2012 Training Materials

Lees meer ...

Belangstelling? Zie onze prijzen of bel ons op 024-8457770

It is recommended you have a general knowledge of Microsoft Windows and be able to use Microsoft Dynamics AX 2012 for basic functions.

In addition, it is also recommended you habe a general knowledge termonology and concepts in production, trade and logistics and inventory management.

Weet je niet zeker of je voldoet aan de vereisten?

Firebrand levert in een afleidingsvrije omgeving waardoor je je volledig kan focussen op de te bestuderen materie. We bespreken graag jouw technische achtergrond, ervaring en kwalificaties om vast te stellen of deze versnelde cursus voor jou geschikt is.

Belangstelling? Zie onze prijzen of bel ons op 024-8457770